Apex Concrete Solutions Concrete Contractor · Daytona Beach, FL
Who We Are

About

A local concrete contractor serving homeowners across Daytona Beach, FL.

Home › About Us
Apex Concrete Solutions completed project
Our Story

How We Approach a Concrete Job

We pour and repair concrete around Daytona Beach, driveways, patios, slabs, the flatwork most homes eventually require. Some of us came up doing the labor first, setting forms and finishing slabs for other outfits, before deciding we could run the job better on our own terms. That hands-on background is still how we approach every pour, checking the base and the forms ourselves instead of leaving it to whoever's on site that day.

If you're here, there's a good chance you've got a slab that's cracked wider than a hairline, sunk on one edge, or gone rough and pitted from age. We find out whether that's a base problem, a drainage problem, or just concrete that was poured too thin, then fix that instead of skimming a bag of patch over it. A slab that's been prepped and jointed right shouldn't require touching again for a couple decades.

10+
Years Experience
500+
Projects Completed
12
Cities Served
Why Choose Us

What you get when you hire us

None of this is complicated. It is mostly just doing what we said we would do.

Licensed and Insured

You're not on the hook if something goes wrong during the pour. Ask for the paperwork before we start, we'll have it ready.

Permits Pulled Right

Concrete work on a new driveway or an addition slab usually requires a permit and an inspection, and skipping that step can cost you when you sell the house. We handle that paperwork so it's not sitting on your plate.

We Clean Up After

A concrete pour makes a mess, wet mix, form boards, washout water. We haul it off the site instead of leaving it for you to deal with.

Written Pricing

No verbal ballpark that turns into a different number on invoice day. You'll see square footage, thickness, and finish spelled out ahead of time.

We Show Up On Schedule

Concrete has to go in the ground on the day we say, because a delayed pour throws off curing time and your plans. If rain's coming, we'll tell you and move the date instead of pouring into it.

Local to Daytona Beach

Sandy soil, a high water table, and summer downpours all change how concrete gets poured and cured here. We work this ground every week, not once a year.

Common Questions

Things people ask us

Questions about who's doing the work and how we operate.

How long have you been doing concrete work?
Experience level varies by contractor, and it's reasonable to ask directly how long a company has been pouring and repairing concrete in the local area. Longevity in the trade often correlates with familiarity with local soil conditions and permit offices. Asking to see examples of past work is a more reliable gauge than years alone.
Do you use your own crew or subcontractors?
Some concrete contractors run their own crew for every stage of the job, from forming to finishing, while others subcontract parts like excavation or decorative stamping. Either approach can produce good results, but it's worth asking directly who will actually be on site pouring and finishing the concrete. A contractor who oversees the crew personally tends to catch problems on pour day faster.
Can I see examples of past concrete work?
Most concrete contractors can show photos of completed driveways, patios, or repairs, and some can point to addresses of past projects in the area. Seeing finished work in person, especially a job that's a few years old, shows how the concrete has held up over time. Fresh concrete looks good on day one; older work tells the real story.
Why hire a smaller concrete contractor instead of a large company?
A smaller concrete contractor often means more direct communication with the person actually running the job, rather than being routed through a call center or project manager. Scheduling can sometimes be more flexible, though larger companies may have more crews available for bigger commercial jobs. The right fit depends on the size and complexity of the project.
Where are you based, and what's your service area?
This concrete contractor is based in Daytona Beach, Florida, and serves surrounding Volusia County communities generally within a 30 to 50 mile radius. That typically includes towns like Ormond Beach, Port Orange, DeLand, and Palm Coast. Confirming a specific address falls within range is a quick call away.
How far in advance do I need to book?
Availability depends on season and current workload, with spring and early summer typically busier for concrete pours in Florida as construction activity picks up before hurricane season. Booking a few weeks ahead is reasonable for a standard driveway or patio job. Larger jobs or those requiring permits may take more lead time.
Do you clean up the site after the job is finished?
Cleanup after a concrete pour should include removing form boards, excess material, and washout debris, leaving the surrounding yard in the condition it was found, minus the new concrete. Concrete washout water is treated as a waste product and should be disposed of properly, not dumped on the property. It's worth asking what cleanup is included before the job starts, since standards vary between contractors.
What happens if something gets damaged during the work?
A licensed and insured concrete contractor carries liability coverage that should address accidental damage to a driveway, landscaping, or irrigation lines during the project. Any damage should be documented and addressed directly with the contractor before final payment is made. This is one of the main reasons verifying insurance coverage upfront matters.
Will you finish a concrete job that another contractor started or abandoned?
Some concrete contractors will take over a partially completed or abandoned job, though it typically requires inspecting what's already been done, since forms, base prep, or reinforcement from the previous contractor may not meet code. It's common to remove and redo some of the existing work rather than build directly on top of it. A site visit is usually required to quote this kind of job accurately.
How can I tell if concrete work is being done correctly while it's happening?
Signs of a properly managed concrete pour include a compacted and leveled base before forms go in, control joints cut within 24 to 48 hours of the pour, and consistent finishing without visible cold joints or trowel marks. Reinforcement, rebar or wire mesh, should be visible and properly positioned before concrete gets poured over it, not resting on the ground. Homeowners can ask to see the base and reinforcement before the pour if they want to check it themselves.

Got something that needs doing?

Free estimate, a price in writing, and work we stand behind.

Get Your Free Quote Call (386) 946-6223
Call (386) 946-6223